Tapping Machines

Approx. Rs 2.05 Lakh / PieceGet Latest Price

Features :

Automatic tapping is driven by lead screw, which provides standard pitch, accurate threading and consistent quality level of tapping.

TEFC motors with F class insulation.

Machines can achieve 20 reversals per minute & hence can achieve max out put up to 10 components per minute.

Easy replacement of lead screw, to change pitch, which is fitted externally.

Machines also available in Fabricated Stand Models.

Machines can be equipped with Multi Spindle Heads for Mass Production.

 
Standard Accessories:

Drill drift.

Comprehensive electrical control panel with all necessary controll gear.

Instruction manual.

V belts.

Intermediate table with rack & pinion arrangement for lifting & lowing of work table.

Main motor of reputed brand, TEFC, F class insulation, 3 Phase, 50 Hz, 6 Pole Induction Motor with all drive elements.

Optional Accessories:

Tool holders

Coolant system consisting of:- reservoir tank with chip collection tray & separation baffles, electric coolant motor, on / off switches, flexible piping & fitting, on / off valves etc & splash gurads or chip collection tray.

Square work table.

Jigs & Fixtures.

Flexible lightly arrangement.

Additional Information:

• Item Code: T-650

Approx. Rs 1.95 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: T-360

Approx. Rs 4.5 Lakh / PieceGet Latest Price

Vibratory bowl feeder Tapping machine - fully automatic machine with pitch controlled.
Suitable for qty production

Approx. Rs 2.5 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: FB-T120

Approx. Rs 2.5 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: FB-T140

Approx. Rs 2.15 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: FB-T50

Approx. Rs 2.15 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: BM-T80

Approx. Rs 2.15 Lakh / PieceGet Latest Price

Standard Accessories :

Reputed make specially designed main motor, with special class of insulation, duly assembled withall drive elements.

Temperature sensors are provided in motor winding to sense the winding temperature.

This device switches off the panel in case of over heating of the electric motor due to continuos reversal, there by protecting the motor from burning.

Comprehensive electrical control panels/operting pendant with all safety elements and 'ASLC' for automation duly wired to the basic machine. (wherever applicable)

Leveling screw arrangement (wherever applicable)

Operation and maintenance manual.

Optional Accessories:

Variable frequency Drive for main spindle infinite speed variation within the range.

Wood-peaking cycle for deep hole tapping.

Multi-Spindle tap heads available.

Guide bar arrangement.

Component clamping fixture as per application.

Tool holders suitable for application.

Coolant system.

Flexible lighting arrangement.

Machine cladding

Centralized lubrication system

Mist coolant system.

Anti vibration pads.

Note :

These optional accessories which influence the tapping operation are available at extra cost. Wide verity of each accessory is available. The model selection mainly depends upon the application.

Customers are expected to interact with the our design experts from the factory to finalize theabove accessories.

Additional Information:

• Item Code: FB-T80

Approx. Rs 2.15 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: T-80

Approx. Rs 2.05 Lakh / PieceGet Latest Price

• Automatic tapping is driven by lead screw, which provides standard pitch, accurate threading and consistent quality level of tapping.
• TEFC motors with F class insulation.
• Machines can achieve 20 reversals per minute & hence can achieve max out put up to 10 components per minute.
• Easy replacement of lead screw, to change pitch, which is fitted externally.
• Machines also available in Fabricated Stand Models.
• Machines can be equipped with Multi Spindle Heads for Mass Production.

• Drill drift.
• Comprehensive electrical control panel with all necessary controll gear.
• Instruction manual.
• V belts.
• Intermediate table with rack & pinion arrangement for lifting & lowing of work table.
• Main motor of reputed brand, TEFC, F class insulation, 3 Phase, 50 Hz, 6 Pole Induction Motor with all drive elements.

• Tool holders
• Coolant system consisting of:- reservoir tank with chip collection tray & separation baffles, electric coolant motor, on / off switches, flexible piping & fitting, on / off valves etc & splash gurads or chip collection tray.
• Square work table.
• Jigs & Fixtures.
• Flexible lightly arrangement.

Approx. Rs 1.2 Lakh / PieceGet Latest Price

Approx. Rs 35,000 / pieceGet Latest Price

Approx. Rs 2.5 Lakh / PieceGet Latest Price

• Specially designed motors with F class insulation and temp. sensors embedded in the winding.
• Automatic tapping is driven by lead screw/nut or gear pair provides accurate thread and consistent quality level.
• Easy replacement of gear pair or lead screw/nut for different pitches, fitted externally.
• There is no pulling force on component during tapping.
• In case of spindle overload safety mechanism is provided.
• Tapping cycle : Tap forward-depth-dwell-Tap reverse to Home.
• Micro switch controls the depth of tapping and reversal of motor, providing maximum operational convenience.
• Tapping cycle (Tap forward cycle - dwell - Tap reverse cycle)
• Spindle drive through step/timer pulley.
• Inbuilt job counter & tool change counters.
• Inbuilt clamp / declamp cycle for tooling automation.
• 3 Phase, 50Hz, TEFC, F class insulation, Induction Motor with temperature sensors with its controller.

Additional Information:

• Item Code: FB-T100

Approx. Rs 2.5 Lakh / PieceGet Latest Price

Features:

Tapping cycle (Tap forward cycle - dwell - Tap reverse cycle)

Spindle drive through step/timer pulley.

Inbuilt job counter & tool change counters.

Inbuilt clamp / declamp cycle for tooling automation.

3 Phase, 50Hz, TEFC, F class insulation, Induction Motor with temperature sensors with its controller.

Automatic tapping is driven by Lead Screw which provides standard pitch, accurate thread and consistent quality level for tapping.

Easy replacement of Lead Screw for different pitches, fitted externally.

There is no reverse cut or pulling force on component during return stroke of tapping.

Machines can be equipped with Multi-Spindle Heads for mass production./li>

Machines available in Horizontal as well as Vertical axis.

Standard Accessories:

Operation and maintenance manual.

Main motor of reputed brand, 3 Phase, 50 Hz, TEFC, F Class insulation, duly assembled with all drive elements.

Comprehensive electrical control panels/operting pendant with duly wired to the basic machine.

Inbuilt job counter & tool change counters.

Flexible lighting arrangement.

Optional Accessories:

Tool holders suitable for application.

Variable frequency Drive for main spindle infinite speed variation.

Coolant system-complete with necessary splash guards etc.

Component orientation & clamping fixture as per application.

Machine cladding.

Centralized lubrication system if required

Specifications:
ModelT140T120T100Maximum Tapping CapacityM30M20M12Spindle TaperMT4MT3JT6Spindle Travel140mm120mm100mm Spindle Speeds (Optional)100-800rpm100-1000rpm500-830-1250rpmThroat (Column to Spindle Centre)260mm230mm180mmTable Area600*400mm500*400mm400*300mmColumn DiameterØ 115mm Ø 102mmØ 80mmDistance from Spindle To Table100-700mm100-600mm100-400mmMotor HP (6P)3HP2HP1HPOverall Height2100mm2100mm1600mmWeight (Approx)700kg600kg220kg

Approx. Rs 1.25 Lakh / PieceGet Latest Price

• Unique and versatile machine, faster than conventional machines used.
• Being flexible arm arrangement covers large working area. Even working on floor is also possible.
• Machines with Swivel Unions gives flexibility of operation in vertical, horizontal, and in angular plane.
• Best machines for heavy and bulky components.

Additional Information:

• Item Code: PTM-C

Approx. Rs 1.25 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: PTM-A

Approx. Rs 1.25 Lakh / PieceGet Latest Price

Approx. Rs 1.25 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: PTM-B

Approx. Rs 2.15 Lakh / PieceGet Latest Price

• Moduler construction for SPM manufacturing & other application are provided
• Modules from standard manufacturing range , with interchangeability
• Simple & application orientated designs
• Low cost & highly productive modules
• Graded material used & necessary parts are duty heats treated to give longer life . All brought outs are of reputed makes & brands
• All modules are machine with necessary & sufficient for assembly
• All these SPM modules are provided with Auto-CAD drawings & detail technical specifications to design SPM

• Quill feed units
• With feeding arrangement by hydraulic or by hydro pneumatic or in case of tapping machines though mechanical pitch contrast drive
• These heads can be mounted horizontal, vertical or Angular position as per the application
• Spindle is drive n independently by independent motor
• Unit consists of limit switches, Adjustable mechanical feed valves &mechanical feed dogs, positive depth stoppers
• For feeding arrangement hydraulic power on pneumatics power has to be given eternally

Additional Information:

• Item Code: T-50

Approx. Rs 2.55 Lakh / PieceGet Latest Price

• Air-Hydraulic Rapid Tapping Machine has rapid thru Hydro-Pneumatic supply & tapping cycle by lead screw mechanism.
• Tapping cycle (Rapid forward - Tap forward cycle - dwell - Tap reverse cycle - Rapid Return)
• Spindle drive through stepped timer pulley.
• TEFC motors with F class insulation.
• Automatic tapping is driven by Lead Screw which provides standard pitch, accurate thread and consistent quality level for tapping.
• Easy replacement of Lead Screw for different pitches, fitted externally.
• There is no reverse cut or pulling force on component during return stroke of tapping.
• Machines can be equipped with Multi-Spindle Heads for mass production.

• Operation and maintenance manual.
• Main motor of reputed brand, TEFC, F class insulation, 3 Phase, 50 Hz, 6 Pole Induction Motor with all drive elements.
• Comprehensive electrical control panels/operting pendant with duly wired to the basic machine.
• Hydro-Pneumatic Systems duly interfaced with the mother machine.

• Tool holders suitable for application.
• Variable frequency Drive for main spindle infinite speed variation.
• Coolant system-complete with necessary splash guards etc.
• Component orientation & clamping fixture as per application.
• Machine cladding.
• Centralized lubrication system if required.
• Job counters & lighting arrangement.

Approx. Rs 1.3 Lakh / PieceGet Latest Price

Flexi Arm Tapping machine -

Pneumatic flexi Arm Tapping machine

Hydraulic flexi Arm Tapping machine