Drilling Machines

Approx. Rs 50,000 / PieceGet Latest Price

• Hydraulic/ Pneumatic Systems (whichever is applicable duly interfaced with the mother machine.
• Comprehensive electrical control panels/operting pendant with all safety elements and 'ASLC' for automation duly wired to the basic machine.
• Reputed make main motor duly assembled on the machine with all drive elements.
• Leveling screw arrangement (wherever applicable)
• Operational and maintenance manual.

• Variable frequency Drive for main spindle infinate speed variation.
• Wood-peaking cycle for deep hole drilling.
• Multi-Spindle drill heads with guide bar arrangement, & movable jig-plate.
• Component clamping fixture as per application.
• Tool holders suitable for application.
• Coolant system- complete with necessary splash guards etc.
• Flexible lighting arrangement.
• Machine cladding.
• Centralized lubrication system.
• Anti vibration pads.

• These optional accessories which influence the drilling operation are available at extra cost. Wide verity of each accessary is available. The model selection mainly depends upon the application.
• Customers are expected to interact with the our design experts from the factory to finalize the above accessories.

Approx. Rs 1 Lakh / PieceGet Latest Price

• Hydraulic Drilling Machines - For mild steel or medium hard materials.
• Timer based Wood Pecking Drilling Cycle for deep hole drilling application.
• Machines can also be used for Standard Drilling, Champhering, Reaming, Hole milling, etc operations.
• Machines available in horizontal as well as vertical axis.
• Rigid Construction, Fabricated base Stress relieved and duly scrapped to achieve desired accuracies as per IS standards.
• Spindle is firmly arrested in two combination, P4 Class, preloaded bearings to take max axial thrust & radial loads.
• Drilling cycle (Rapid forward - feed (peck drilling cycle) - dwell - rapid return).
• Machines are operated with Programable logic controller (PLC) for maximum operator convenience
• Spindle drive through timer belts and inter changeable pulley sets.
• Hydraulic spindle feed, infinitely variable within the range.
• Inbuilt clamp / decamp cycle for tooling automation.
• Machines can be equipped with Multi-Spindle Heads for mass production

• Hydraulic Systems duly interfaced with the mother machine.
• Comprehensive electrical control panels/operating pendant and PLC for automation, duly wired with the machine.
• Main motor of reputed brand, F Class Insulation, duly assembled on the machine with all drive arrangement.
• Operation and maintenance manual.
• Flexible lighting arrangement.
• Inbuilt job counter & tool change counters.

• Tool holders suitable for application.
• Coolant system-complete with necessary splash guards etc.
• Component orientation & clamping fixture as per application.
• Variable frequency Drive for main spindle to achieve infinite speed variation within the range.
• Machine full cladding.
• Centralized lubrication system, if required

Approx. Rs 1.34 Lakh / PieceGet Latest Price

• Manual & Pneumatic feed available
• These machines are specially designed for drilling small sized holes at very high speeds
• Suitable for drilling in size min 0.5 to max 6mm.
• All rotating parts are subjected to dynamic balancing, for precise & vibration free operation

• Instruction manual
• Flat belts
• Induction motor, 3 phase, 50 Hz, continues duty, of reputed make
• On / Off switch duly wired

• Tool Holders : Collets Chuck & Collets as per requirement.
• Coolant system consisting of: - reservoir tank with chip collection tray & separation baffles, electric coolant motor, on/off switches, flexible piping & fitting, on/off valves etc.
• Flexible lighting arrangement
• Splash guards or chip collection tray
• Variable Frequency Drive.

Approx. Rs 1.2 Lakh / PieceGet Latest Price

• Rigid construction, Fabricated base with
• ‘T’ slotted plate.
• Drilling cycle :Rapid forward - feed -dwell-rapid return
• Spindle drive through timer belt.
• Hydraulic or pneumatics spindle feed,infinitely variable within the range.
• ASLC’ for automation.
• Built-in Coolant System.(Optional)
• Hydraulic Job Clamping (Optional)
• V.F.D. for infinitely variable Spindle speeds within the range (Optional)
• Wood-pecking cycle for deep hole drilling.(Optional)

Approx. Rs 50,000 / PieceGet Latest Price

Approx. Rs 1.25 Lakh / PieceGet Latest Price

• Spindle speeds and mechanical feeds are achieved by gear box Gear box is lubricated by "Trocho pumps"
• All gears All spline shafts warm shafts etc are heat treated to in crease life and grounded for precision

• For heavy duty application such, as drilling reaming boring tapping
• Specially suitable for multi spindle drilling, tapping head mounted on spindle for mass protection processing

Approx. Rs 1.45 Lakh / PieceGet Latest Price

• Manually operated Machines.
• Highly Versatile & Reliable Machines for production.
• Easy to operate and maintenance free.
• Featured with high accuracy, high rigidity, low noise & wide range of speed change.
• Rigid stream lined construction with reliable & lasting accuracy.
• Machines plug to start type.
• Single point graduated collar depth control system is provided for max operator onvenience.
• Ex-stock availability & competitive pricing.
• Spares available on demand.
• Machines also available in Fabricated stand models.

• Instruction manual.
• V belts.
• Intermediate table with rack & pinion arrangement for lifting & lowering of work table.
• Main motor of reputed brand, 3 phase, 50 Hz, 4 pole, continues duty.
• On/ off switch duly wired.

• Tool Holders
• Coolant system consisting of:- Reservoir tank with chip collection tray, separation baffles, electric coolant motor, flexible piping & fittings, on/off valves, splash guards or chip collection tray etc.
• Flexible Lighting Arrangement.
• Square Work Table

Product Price :Get Latest Price

.

Approx. Rs 1.65 Lakh / PieceGet Latest Price

Approx. Rs 1.25 Lakh / PieceGet Latest Price

• Mechanical Auto feed Drilling Machines.
• The Automatic Feed drilling operation is driven by hollow clutch gear mechanism.
• Oil deep gear drive arrangement for long lasting life of gears.
• Single Point graduated collar depth control system is provided for maximum operator
  convenience.
• Automatic feed drilling performance with Auto disengagement of feed after reaching depth
  & return back to the home position.
• Inbuilt feed drive safety clutch arrangement to prevent accidental damage.
• Set able Multi feeds provided on the Machines by change of belts.
• Machines also available in Fabricated Stand Models.
• Machines can be equiped with Multi spindle Heads for Mass Production.

• Drill drift.
• Instruction manual.
• V belts
• Intermediate table with rack & pinion arrangement for lifting & lowering of work table
• Main motor of reputed brand, 3 phase, 50 Hz, 4 pole, continues duty.
• On/Off switch duly wired.

• Tool holders
• Coolant system consisting of: - reservoir tank with chip collection tray separation baffles, electric coolant motor, on / off switches, flexible piping & fitting, on / off valves etc. Splash guards etc.
• Square work table.
• Jigs & Fixtures.
• Flexible lightly Arrangement

Specifications:

Approx. Rs 1.1 Lakh / PieceGet Latest Price

Features:

High Speed manually operated Machines.

Highly versatile and reliable Machines for micro and small hole drilling.

Easy to operate and maintenance free.

Feature with high accuracy, Low noise & Dynamically balanced spindle rotation.

Machines plug to start type.

Machines also available in fabricated stand models

Standard Accessories:

Instruction manual.

V belts.

Main motor of reputed brand, 3 phase, 50 Hz, and ON / OFF switch duly wired

Optional Accessories:

Tool Holders

Coolant system consisting of:- Reservoir tank with chip collection tray, separation baffles, electric coolant motor, flexible piping & fittings, on/off valves, splash guards etc

Flexible Lighting Arrangement

Specifications:
Model M-360IM-103NOperationManualManualMaximum Drilling Capacity (S45C)Ø 6mmØ 3mmSpindle TaperER-16ER-16Spindle Travel60mm40mmMotor HP0.5HP0.25HPNumber of Speed35Maximum Spindle Speed(2P)5000.7000.8500 rpm
(4P)2500.3500.4250 rpm(2P)3000.5000.7900.12200.18000 rpmThroat (Column to Spindle Centre)150mm240mmTable Size200 x 200mm200 x 200mmDistance From Spindle To Table200mm150mmColumn DiameterØ 80mmØ 70mmBase Size200 x 380mm350 x 370mmOverall Height730mm600mmWeight 48kg38kg

Approx. Rs 1 Lakh / PieceGet Latest Price

Approx. Rs 1.25 Lakh / PieceGet Latest Price

We are offering Auto feed Column Drilling Machine to our clients.

Approx. Rs 1.75 Lakh / PieceGet Latest Price

Approx. Rs 40,000 / PieceGet Latest Price

Approx. Rs 1.4 Lakh / PieceGet Latest Price

Approx. Rs 1.35 Lakh / PieceGet Latest Price

• Powerful and precise universal column drilling machine with stepless drive mechanism.
• Electromagnetic clutch for feed.
• Table adjustable via rack and pinion, rotatable around column. 
• Motor protection, Depth and RPM indicator.

Additional Information:

• Delivery Time: 10am -6 pm

Approx. Rs 75,000 / PieceGet Latest Price

Additional Information:

• Item Code: BFDH-6100

Approx. Rs 1.5 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: BFH-6150

Approx. Rs 50,000 / PieceGet Latest Price

Additional Information:

• Item Code: BFDH-7120

Approx. Rs 65,000 / PieceGet Latest Price

Manual Feed Drilling Machines

Approx. Rs 40,000 / PieceGet Latest Price

• Pneumatic Drilling Machines - Sutaible for Aluminum or soft material.
• Recommended operations : Drilling, Champhering, Reaming, Hole Milling, Spot Facing, Countersinking.
• Rigid Construction, Fabricated base Stress relieved and duly scrapped to achieve desired accuracies as per IS standards.
• Spindle is firmly arrested in two combination, P4 Class, preloaded bearings to take max axial thrust & radial loads.
• Drilling cycle (Rapid forward-feed-dwell-rapid return)
• Spindle drive through timer belts and inter changeable pulley sets.
• Pneumatic spindle feed, infinitely variable within the range.
• Inbuilt clamp / decamp cycle for tooling automation.
• Machines can be equipped with Multi-Spindle Heads for mass production.

• Pneumatic Systems duly interfaced with the mother machine.
• Comprehensive electrical control panels/operating pendant, duly wired with the machine.
• Main motor of reputed brand, F Class Insulation, duly assembled on the machine with all drive arrangement.
• Operation and maintenance manual.
• Flexible lighting arrangement.
• Inbuilt job counter & tool change counters.

• Tool holders suitable for application.
• Coolant system-complete with necessary splash guards etc.
• Component orientation & clamping fixture as per application.
• Variable frequency Drive for main spindle to achieve infinite speed variation within the range.
• Machine cladding.
• Centralized lubrication system.

Approx. Rs 1.5 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: BFH-5100